Topless Rabbit Forums

Great tip you gave me on the defrost/ center flap servo and the recirculation flap servo are the same. So I took the recirc servo and put it where the defrost /center vent servo goes so I could put the dash and stuff back together. Center vent flow is good now. Also used you trick about turning thos...

I went out and purchased a Mityvac vacuum handpump today. I was wasting alot of time with the other one I had only to find out it wouldn't hold a vacuum. What a great vacuum handpump. Thanks for that. Couple of questions if you don't mind. The servo that is on the left side of the radio that is the ...

Thanks for the diagrams and the link. Explained alot .Good idea on the debris it could be the culprit. Even harder to get to based on the exploded views. Would it most likely be past the fan and built up on the evaporator? I have a hand vacuum pump that I was going to use to test the servos. If I co...

I checked out the heater control valve and when it is completely off there is no hot air coming through the center vent when the ac or cool air is selected. When I select heat and check the heater control valve it is in the open position and hot air flows generously out of the center vent. So the he...

Thanks for the help Kamzcab86. You know I was all over the cabby-info website before I found this Topless Rabbit Forum . The two together have been a huge help. I am with you on how come I can get heated air out of the center vent but not cool air. I studied the flow graphics for all the vents and t...

Thanks for all the help. I'll try loading some pictures. But Briano I loved your post in the General Car Work responding to " Trying to get to the center servo" . Since I have the same problem. And it sounded so easy so I started trying to get to my center servo in my 1992 VW Cab. I remove...

Thanks for the help in posting a picture. On the air vent problem. Check out the discussion in the General Car Work Forum pg 5 of 7 there is a question from BigDaddy90Cabby who is "trying to get to the center vent servo?" The answer sounds really well described. I suspect this for could be...

Cab does great on all small turns but for the tight turns it has a squeal. I looked to the power steering. Levels are good . No leaks. What else could this be? Thanks for any help.

I have a 1992 Cab that I just painted and put a new top on. Also added a new windshield as well. She is coming together nicely. Kind of my hobby car. I love the way she drives. I have a question and maybe this isn't the right forum and someome could tell me where that forum might be. Has anyone had ...